High operational throughput   Highly efficient Suitable for tension-sensitive wires & cables  Economical processing    The CableCoiler 2000 is a high demand cable coiling system.  It enables fully automatic coiling of tension-sensitive cables and wires with diameters of less than 1 mm (0.039"), e.g. Glass Optical Fibers as well as heavy cables up to 14 mm (0.55") in diameter. Thanks to the configuration with two alternating turntables, the operator can unload a finished coil from the first turntable while the machine is coiling the next wire or cable on the second one.   High-Quality Coils & Economical Processing The cable end can be precisely positioned and clamped.  For variable coiling heights and high-quality coils, the level winding feature can be activated on demand. Synchronized, highly dynamic feeding and coiling processes between the cable processing machine and the CableCoiler 2000 ensure minimal tension forces and high-quality coils. The coiling parameters are provided by the Schleuniger cut & strip machine which enables short changeover times and economical processing even when running small batches.

Machine CableCoiler 2000  Machine Compatability PowerStrip 9500 MegaStrip 9600 CompactStrip 9200   Processable Cable Lengths  0.9 - 1000 m (2.95 - 3'280 ft)  Cable Diameter  0.7 - 14 mm (0.02" - 0.55")  Coil Inner Diameter 120 - 280 mm (4.72" - 11.02")  Coil Outer Diameter Up to 400 mm (15.75") Coil Height  120 mm (4.72") extendable up to 150 mm (5.9")  Max. Coil Weight 20 kg (44.4 lbs.) Coiling Speed Up to 2.5 m / s (8.2 ft / s) depending on coil diameter  Interfaces CAN, foot pedal, Emergency Stop Unit NV 1000  Options Various special guides   Power Supply 95 - 132 VAC, 190 - 264 VAC 47 - 64 Hz; 500 VA  Compressed Air 6 bar (90 psi)  Operational pressure 2/6 bar (30/90 psi)  Weight Approx. 120 kg (267 lbs.)   Dimensions (L x W x D) 800 x 1080 x 1'270 mm (31.5" x 42.5" x 50") CE-Compatibility The CableCoiler 2000 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.  Note Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.