Higher production rate & efficiency Full synchronization with MegaStrip 9600 Easy menu-driven programming Ergonomic handling of heavy coils Programmable diameter of the coil   The CableCoiler 4000 is a motorized heavy-duty cable coiling machine designed to interface with the MegaStrip 9600. It coils cable up to an inner diameter of 600 mm (23.6") and handles cable coils weighing up to 80 kg (178 lbs.) Thanks to its flexibility, easy programming and ergonomic handling, the CableCoiler 4000 is a perfect solution to improve the production rate as well as the efficiency in a production line. Synchronization with the MegaStrip 9600 The CableCoiler 4000 operates with the MegaStrip 9600 in a fully synchronized mode. The cable is fed from the MegaStrip 9600 through a guide directly to the coiler pins. The CableCoiler 4000 coils the cable simultaneously to the feeding speed of the MegaStrip 9600. After the coiling process, the coiler pins retract and the safety cover opens. The coiled cable can easily be removed from the machine. Coiled cable on the turntable with retracted pins for easy removing of the coiled material

Machine CableCoiler 4000 Cable Diameter Up to 35 mm (1.38") depending on the flexibility of the cable  Coil Inner Diameter 250 - 600 mm (9.8" - 23.6")  Max. Coil Outer Diameter 750 mm (29.5")  Max. Coil Weight 80 kg (177.8 lbs.) Max. Coiling Speed 2 m / s (6.56 ft)  Interface MSINC on MegaStrip 9600  Power Supply 230 VAC, 50 Hz  110 or 115 VAC with optional transformer Compressed Air 6 bar (90 psi) operating pressure  Weight 180 kg (400 lbs.)   Dimensions (H x W x D) 1'230 x 1'060 x 1'260 mm (48.4" x 41.7" x 49.6")  CE-Compatibility The CableCoiler 4000 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.  Note Specifications are subject to change without notice. Exceptions may apply depending on application, wire and other variables.