• With its 12 kg, MC 25 is a very lightweight tool, and thanks to its carrying handle it can be moved easily between different job sites.  
  
• It does not require pressurised air, but only a 230 V mains connection.  
  
• It takes only 1.5 seconds to crimp and strip the insulation.  
  
• The MC 25 processes wire end sleeves with a cross section of 0.5 to 2.5 square millimetres and a standard length of 8 mm.  
  
• You can change the applicatior for the diameter of the sleeves in a matter of seconds without any additional tools. Just snap it in and off you go!  
  
• All applicators are clearly arranged in a kit that comes with the crimper.  
  
• Reliable operation thanks to an advanced microprocessor-controlled cam drive.  
  
• The stripping unit is fitted with V-blades. It can be used for most commercially available conductors.  
  
• Tape-mounted wire end sleeves are fed into the machine via a dispenser fitted to its right side.

This version is only available for export.   
  
 

Technical Data MC 25
Mains power:	230 V / 50 Hz
Power input:	80 VA
Operating range:	0,5 - 2,5 mm² / 20 -14 AWG
Wire end sleeves:	in accordance with DIN 46 228 part 4 tape mounted
Crimp section:	trapezoidal
Cycle:	1.5 s approx.
Control:	microprocessor-controlled cam drive
Unit Counter:	LCD display
Changing applicators:	under 10 s
Dimensions:	165 x 270 x 320 mm (W x H x D)
Weight:	12 kg