Precision At Its Best

Get to know one of the most flexible stripper crimper machines: The fully programmable StripCrimp 200. This machine is most suitable for high precision stripping and subsequent crimping of side- or rear-feed terminals for wires between 30 - 12 AWG (0.05 – 4.00 mm²). The strip and crimp machine StripCrimp 200 captivates by great flexibility and user-friendly operation. The machine is highly suitable as a semi-automatic stripper crimper or within fully automatic transfer systems and runs fast, quietly and safely.

Flexibility and User-friendliness

All stripping parameters and special functions are programmable through a user-friendly operating panel. All relevant parameters are displayed on the multi-lingual display

The user is guided through the intuitive menus so the parameters for a wide range of applications can be entered easily and efficiently. Furthermore, the menu structure helps to minimize entry errors and maximize productivity. The StripCrimp 200 includes a program memory for all stripping parameters. Finally, all stripping slugs are removed by a suction device and discarded through the side of the machine.

Thanks to the quick-change base plate applicators are changed in seconds. Crimp height can be easily adjusted on the press with the standard fine-adjust (micro-adjust) mechanism. Wayback and recut are additional functions which can be enabled software-wise and therefore make the unit even more versatile.

The user can program piece and batch counters and for special jobs, the machine can be switched to different modes such as “crimp only”, “strip only” and “short outer jacket”. In the short outer jacket mode in combination with the special cable clamping kit mounted on the UNI-A applicator, it is possible to produce multi-conductor cables with very short break-out lengths.

Machine	StripCrimp 200
Press Force	33 kN (3.7 tons)
Cross Section Range	0.05 - 4 mm² (30 - 12 AWG)
Stripping Length	0.5 - 15 mm (0.02 - 0.59")
Way-Back	programmable, 0 - 2 mm (0 - 0.08")
Recut	0 - 4 mm (0 - 0.157")
Outer Diameter	Up to 6.3 mm (0.25")
Press Stroke	40 mm (1.575")
Shut Height	135.788 mm (5.3460")
Crimp Height Adjustment	+ 0.25 mm (0.01") in increments of 0.025 mm (0.001")
Cycle Time	< 0.9 s for stripping and crimping (crimp cycle time programmable from 350 ms to 1 s)
Cable Clamping	clamping force adjustable with pneumatic pressure reducing valve
Memory Capacity	100
Cycle Trigger	Sensor actuator, foot pedal (optional)
Noise Level	< 70 db (A)
Power Supply	115 - 230 VAC 50 / 60 Hz 255 VA
Power Rating	0.75 KW
Dimensions (W x D x H)	350 x 350 x 710 mm (13.8" x 13.8" x 28")
Weight	90 kg (200 lbs)
Options	Pneumatic valve to activate pneumatic crimp applicators Crimp force monitoring Short outer jacket stripping kit (assembled on UNI-A crimp applicator) Carrier strip cutter Terminal oiler Paper winder Work light Foot pedal
CE-Compatibility	The StripCrimp 200 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.