The CoaxStrip 5300 NT is a fully programmable multi-step stripping machine for micro-coaxial, coaxial, triaxial, multi-conductor cable and single conductor wire. This benchtop unit can easily process cables with inner conductors ranging from 0.15 mm (AWG 36) up to 4 mm (0.157'') maximum cable outer diameter and strips lengths up to 27 mm (1.06").

The high-precision CoaxStrip 5300 NT excels with short cycle times and high productivity. Due to its open construction and an air-jet cleaning the blades and the centering jaws, the stripping head requires little maintenance.

New Stripping Head Design

Sophisticated centering and incision mechanics allow high precision processing of cables that are difficult to handle such as micro-coxial cables, cables with soft insulation, or dielectric materials. The new stripping head design allows the blades to travel perpendicular to the cable axis. This results in consistently superior stripping quality and longer blade life. The high rotary speed of the stripping head, programmable blade feed rate and improved cutting concept guarantee high precision incisions into the individual layers of a multi-layer cable without damaging adjacent layers.

Rotating cable centralizers are mounted directly in front of the blades. The CoaxStrip 5300 NT comes with universal V-type centralizers as standard. Cable-specific radius type centralizers are also available for processing thin cable diameters. These custom-made centralizers are made a few hundredths of a millimeter larger than the cable; therefore no torque is applied to the cable. This enables precise incisions without twisting the cable.

High Performance & User-Friendliness

Short cycle times and wire list processing ensure high performance and will yield you a quick return on investment. To guarantee short operator training times, the CoaxStrip 5300 NT can be programmed intuitively with a Graphical User Interface (GUI).

Its high-resolution monochrome display allows the user to view a schematic diagram of the cable end, complete with programmed dimensions. Using Iguana all data can be backed up conveniently on a regular PC.

Machine	CoaxStrip 5300 NT
Cable Types	micro-coaxial cable coaxial cable triaxial cable shielded wire and cable single conductor wire / discrete wire
Max. Cable Diameter (O.D.)	4 mm (0.157")
Min. Conductor Diameter	AWG 36 (0.15 mm / 0.006")
Diameter Increments	0.01 mm (0.001")
Max. Stripping Length	27 mm (1.06")
Stripping Length Increments	0.01 mm (0.001")
Max. Stripping Steps	9
Cable Clamping	Motor driven with programmable clamping force
Cycle Time	< 4 sec depending upon cable type and programming
Production Rate	up to 600 pcs./h depending upon cable type and programming
Program Capacity	1000 cables / 100 wire lists
Interfaces	RS 232, foot pedal, robotic interface (optional)
Noise Level	< 70 db (A)
Power Supply	100 / 115 VAC: fuse 2.0 AT 230 / 240 VAC: fuse 1.0 AT 50 - 60 Hz, 100 VA
Compressed Air	5 - 12 liter per minute at 5 bar depending on cable program
Dimensions (L x W x H)	494 x 140 x 218 mm (19.4" x 5.5" x 8.6")
Weight	10 kg (22 lbs)
CE-Compatibility	The CoaxStrip 5300 NT fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.