|
WATCH THE MC 25 IN ACTION (click link below)
|
|
|
|
Your efficient helper for processing tape-mounted insulated wire end sleeves
-
With its 12 kg,
MC 25
is a very lightweight tool, and thanks to its carrying handle it can be moved easily between different job sites.
-
It does not require pressurised air, but only a 230 V mains connection.
-
It takes only 1.5 seconds to crimp and strip the insulation.
-
The
MC 25
processes wire end sleeves with a cross section of 0.5 to 2.5 square millimetres and a standard length of 8 mm.
-
You can change the applicatior for the diameter of the sleeves in a matter of seconds without any additional tools. Just snap it in and off you go!
-
All applicators are clearly arranged in a kit that comes with the crimper.
-
Reliable operation thanks to an advanced microprocessor-controlled cam drive.
-
The stripping unit is fitted with V-blades. It can be used for most commercially available conductors.
-
Tape-mounted wire end sleeves are fed into the machine via a dispenser fitted to its right side.
This version is only available for export.
|
Technical Data MC 25
|
|
Mains power:
|
230 V / 50 Hz
|
|
Power input:
|
80 VA
|
|
Operating range:
|
0,5 - 2,5 mm˛ / 20 -14 AWG
|
|
Wire end sleeves:
|
in accordance with DIN 46 228 part 4 tape mounted
|
|
Crimp section:
|
trapezoidal
|
|
Cycle:
|
1.5 s approx.
|
|
Control:
|
microprocessor-controlled cam drive
|
|
Unit Counter:
|
LCD display
|
|
Changing applicators:
|
under 10 s
|
|
Dimensions:
|
165 x 270 x 320 mm (W x H x D)
|
|
Weight:
|
12 kg
|
